2017年发表论文清单
一、材料学科ESI期刊：
1.Honglai Li, Xueping Wu, Hongjun Liu, Biyuan Zheng, Qinglin Zhang, Xiaoli Zhu, Zheng Wei, Xiujuan Zhuang, Hong Zhou,WenxiTang,XiangfengDuan,Anlian Pan*, Composition-Modulated Two-Dimensional Semiconductor Lateral Heterostructures via Layer-Selected Atomic Substitution, ACS Nano 2017, 11, 961−967.
2.Kui Liang* , Hailin Yang, Wenxun Guo, Jianlong Du, Lingyun Tian, Xiaofeng Wen, Facile preparation of nanoscale silicon as an anode material for lithium ion batteries by a mild temperature metathesis route, Journal of Alloys and Compounds 735 (2018) 441-444
3.P. Xie, M. Han, C.L. Wu , Y.Q. Yin, K. Zhu, R.H. Shen, J.H. Chen, A high-performance TRIP steel enhanced by ultrafine grains and hardening precipitates, Materials & Design ,127 (2017), 1–7
4.Jimiao Jiang , Jiang Wu , Song Ni , Hongge Yan , Min Song,Improving the mechanical properties of a ZM61 magnesium alloy by prerolling and high strain rate rolling, Materials Science & Engineering A 712 (2018) 478–484
5.Yingwei Wu , Kun Peng∗, Ling Tang, Wei Zhang, Crystallization mechanism of Fe78Si13B9 amorphous alloy induced by ion bombardment, Intermetallics 91 (2017) 65–69
6.Shuai Liu , Han Yu , and Kaibing Huang, Structural characteristics and biocompatibility of a casein-based nanocomposite for potential biomedical applications, Journal of Materials Science, March 2018, Volume 53, Issue6, pp 3959–3971.
7.Wen Qin, Licai Fu∗, Jiajun Zhu, Wulin Yang, Deyi Li, Lingping Zhou, Tribological properties of self-lubricating Ta-Cu films, Applied Surface Science 435 (2018) 1105–1113
8.Jie Teng, Xiang Zeng, Xia Xu, Jin-Gang Yu, Assembly of a novel porous 3D graphene oxide-starch architecture by a facile hydrothermal method and its adsorption properties toward metal ions, Materials Letters 214 (2018) 31–33
9.Jin Li, Lei Zheng, Hongbo Liu, A novel carbon aerogel prepared for adsorption of copper(II) ion in water, Journal of Porous Materials, December 2017, Volume 24, Issue6, pp 1575–1580.
10.Tianle Xie, Licai Fu∗, Wen Qin, Jiajun Zhu, Wulin Yang, Deyi Li, Lingping Zho∗, Self-assembled metal nano-multilayered film prepared by co-sputtering method, Applied Surface Science 435 (2018) 16–22
11.Jiajun Zhu *, Meng Xu, Wulin Yang, Deyi Li, Lingping Zhou and Licai Fu * , Friction and Wear Behavior of an Ag–Mo Co-Implanted GH4169 Alloy via Ion-Beam-Assisted Bombardment, Coatings 2017, 7, 191
12.Jun-xiang Han, Yu-lin Cheng, Wen-bin Tu, Ting-Yan Zhan, Ying-liang Cheng∗,The black and white coatings on Ti-6Al-4V alloy or pure titanium by plasma electrolytic oxidation in concentrated silicate electrolyte, Applied Surface Science 428 (2018) 684–697.
13.Hanwen Liu, Yuqin Zou,* Li Tao, Zhaoling Ma, Dongdong Liu, Peng Zhou, Hongbo Liu,* and Shuangyin Wang*, Sandwiched Thin-Film Anode of Chemically Bonded Black Phosphorus/Graphene Hybrid for Lithium-Ion Battery, small 2017, 13, 1700758.
14.P.N. Lim , T. Konishi , Z. Wang , J. Feng , L. Wang , J. Han, Z. Yang , E.S. Thian, Enhancing osteoconductivity and biocompatibility of silver-substituted apatite in vivo through silicon co-substitution, Materials Letters 212 (2018) 90–93.
15.S.B. Wang, Z.R. Liua, S.L. Xia, J. Key, J.H. Chen,Tetragonal-prism-like Guinier–Preston–Bagaryatsky zones in an AlCuMg alloy, Materials Characterization 132 (2017) 139–144.
16.Wenbin Tu, Yulin Cheng, Xinyao Wang, Tingyan Zhan, Junxiang Han, Yingliang Cheng*, Plasma electrolytic oxidation of AZ31 magnesium alloy in aluminatetungstate electrolytes and the coating formation mechanism, Journal of Alloys and Compounds 725 (2017) 199e
17.Peng-zhao Gao a, b, * , Mo-yu Xu a , Zheng Yuan a , Lei Cheng a , Jian-jun Liang a , Han-ning Xiao a , Rui-he Chen c, Temperature dependence of the mechanical and thermal expansion behaviors of MoSi2-RSiC composites with a three-dimensionally (3D) interpenetrated network structure, Journal of Alloys and Compounds 731 (2018) 1103e1111.
18.Qingyun Shi, Wuhua Yuan, Xiongyu Chao, Zhifei Zhu, Phase stability, thermal conductivity and crystal growth behavior of RE2O3 (RE=La,Yb,Ce,Gd) co-doped Y2O3stabilized ZrO2 powder, J Sol-Gel Sci Technol (2017) 84:341–348.
19.Xiang Zhang, Changling Fan, and Shaochang Han,*Improving the initial Coulombic efficiency of hard carbon-based anode for rechargeable batteries with high energy density, J Mater Sci (2017) 52:10418–10430.
20.Qiming Zhuang, Nan Lin, Yuehui He, Xiyue Kang, Influence of temperature on sintering behavior and properties of TiC-Fe-CoNi-Cr-Mo cermets, Ceramics International 43 (2017) 15992–15998.
21.Hao Tan, Wei Hu, Chao Wang, Chao Ma, Hengli Duan, Wensheng Yan,* Liang Cai, Peng Guo, Zhihu Sun,* Qinghua Liu, Xusheng Zheng, Fengchun Hu, and Shiqiang Wei*,Intrinsic Ferromagnetism in Mn-Substituted MoS2 Nanosheets Achieved by Supercritical Hydrothermal Reaction, small 2017, 13, 1701389.
22.Wei Liu, Dongzhe Wang, Xiaohua Chen, Chunguang Wang , Haiding Liu, Recurrence plot-based dynamic analysis on electrochemical noise of the evolutive corrosion process, Corrosion Science 124 (2017) 93–102.
23.Q.Q. Shao, L.H. Liu * , T.W. Fan, D.W. Yuan, J.H. Chen, Effects of solute concentration on the stacking fault energy in copper alloys at finite temperatures, Journal of Alloys and Compounds 726 (2017) 601-607.
24.Zheng Liu, Ying Zeng, Qunli Tang, Aiping Hu, Kuikui Xiao a, Shiying Zhang c, Weina Deng c, Binbin Fan a, Yanfei Zhu a, Xiaohua Chen a, b, ** Potassium vapor assisted preparation of highly graphitized hierarchical porous carbon for high rate performance supercapacitors, Journal of Power Sources 361 (2017) 70-79.
25.Lili Zhang, Qunli Tang, Xiaohua Chen, Binbin Fan, Kuikui Xiao, Shiying Zhang, Weina Deng, Aiping Hu, Self-assembled synthesis of diamond-like MnCo2O4 as anode active material for lithium-ion batteries with high cycling stabilit, Journal of Alloys and Compounds 722 (2017) 387-393.
26.Kaichen Xu, Zuyong Wang, Chuan Fu Tan, Ning Kang, Lianwei Chen, Lei Ren, Eng San Thian, Ghim Wei Ho, Rong Ji, and Minghui Hong, Uniaxially Stretched Flexible Surface Plasmon Resonance Film for Versatile Surface Enhanced Raman Scattering Diagnostics, ACS Applied Materials & Interfaces 2017 9 (31), 26341-26349.
27.Lei Chen, Youqing Fei, Xiaohua Fan, and Zhao Jiang, Coalescence of mesophase spheres and microstructure of graphitic carbon revealed by scanning electron microscopy, J Mater Sci (2017) 52:12663–12676.
28.Wenmei Feng, Junfeng Han, Jun Ge, Xianglin Peng, Yunong Liu, Yu Jian, Lin Yuan, Xiaolu Xiong, Limei Cha, Cheng Liao, Influence of Annealing Temperature on CZTS Thin Film Surface Properties, Journal of Elec Materi (2017) 46: 288.
29.Zuyong Wang, Feng Wen, Rongkai Zhang, Qinyuan Zhang, Modulated nitric oxide delivery in three-dimensional biomaterials for vascular functionality, MRS Communications (2017), 7, 348–360.
30.Peng-zhao Gao, Zhou-li Lua, Hua-nan Lv, Wei Liu, Bing Yana and Xiao-liang Zhanga, Growth behavior of flower-shaped nano-CdS clusters on biomorphic porous carbon (BPC) substrates using a hydrothermal method, Journal of Ceramic Processing Research. Vol. 18, No. 3, pp. 196~202 (2017).
31.Shuang Chen, Jie Teng, Haibo Luo, Yu Wang, Hui Zhang, Hot deformation characteristics and mechanism of PM 8009Al/SiC particle reinforced composites, Materials Science & Engineering A 697 (2017) 194–202.
32.Poon Nian Lim, Jason Feng, Zuyong Wang, Mark Chong, Toshiisa Konishi, Lay Geok Tan, Jerry Chan, Eng San Thian, In-vivo evaluation of subcutaneously implanted cell-loaded apatite microcarriers for osteogenic potency, J Mater Sci: Mater Med (2017) 28: 86.
33.Y. Hong, C.L. Wu , L. Tian, N. Li, Q. Xu, J.H. Chen, Microstructure and property evolution of Fe-N ferrite undergoing earlystages of precipitation, Materials Science & Engineering A 696 (2017) 198–207.
34.Wei Li, Hongyu Li, Xinguo Yang, Wei Feng and Hongyun Huang, Preparation and properties of novel sulfonic graphene oxide–epoxy resin nanocomposites by resin transfer molding process, Journal of Composite Materials 51(9) 1197–1208.
35.Jiamin Hu, Jie Teng, Xiankun Ji, Dingfa Fu, Wengang Zhang, Hui Zhang, Enhanced mechanical properties of an Al-Mg-Si alloy by repetitive continuous extrusion forming process and subsequent aging treatment, Materials Science & Engineering A 695 (2017) 35–44.
36.Nan Lin, Yuehui He, Jin Zou, Enhanced mechanical properties and oxidation resistance of tungsten, carbide-cobalt cemented carbides with aluminum nitride additions, Ceramics International 43 (2017) 6603–6606.
37.Wen Qin, Licai Fu*, Tianle Xie, Jiajun Zhu, Wulin Yang, Deyi Li, Lingping Zhou, Abnormal hardness behavior of Cu-Ta films prepared by magnetron sputtering, Journal of Alloys and Compounds 708 (2017) 1033-1037.
38.Ling Tang, Kun Peng, Yingwei Wu, Wei Zhang, Effect of ion bombardment on the crystallization kinetics of FeSiNbBCu amorphous alloys, Journal of Alloys and Compounds 695 (2017) 2136-2141.
39.Xuelian Liu, Yuxi Chen, Hongbo Liu, Zhi-Quan Liu, SiO2@C hollow sphere anodes for lithium-ion batteries, Journal of Materials Science & Technology 33 (2017) 239–245.
40.Jinwei Luo†,Wenbin Zhong*†,Yubo Zou†,Changlun Xiong†, andWantai Yang‡, Metal–Organic Coordination Polymer to Prepare Density Controllable and High Nitrogen-Doped Content Carbon/Graphene for High Performance Supercapacitors,ACS Appl. Mater. Interfaces 2017, 9, 1, 317-326.
41.Bing Yang, Ding Chen∗,Synthesis of CuO nanoparticles for catalytic application via ultrasound-assisted ball milling, Processing and Application of Ceramics 11 [1] (2017) 39–44.
42.Qiqi Hua, Chenfan Yang, Yajie Wang, Tiezheng Lv, Pre-wetted treatment for optimized multicrystalline Si wafer texturing and its solar cell efficiency improvement, J Mater Sci: Mater Electron (2017) 28:6823–6828.
43.Lei Yang, Zhongcheng Jiang, Blue-Shift of Ultraviolet Luminescence in Rough Surfaced ZnO Nanotubes Embedded in the AAO Template, Journal of Nano Research, 1661-9897, Vol. 45, pp 175-184.
44.Xiao, Kuikui; Chen, Xiaohua; Deng, Weina; Tang, Qunli; Hu, Aiping; Zhang, Lei; Liu, Zheng; Li, Zhe, LiFePO 4 Coated Homogeneously with 3D Carbon Nanotube Conductive Networks for Enhanced Electrochemical Performance,Journal of Nanoscience and Nanotechnology, Volume 17, Number 1, January 2017, pp. 341-347.
45.Ming Chen, Qiming Zhuang, Nan Lin, Yuehui He, Improvement in microstructure and mechanical properties of Ti(C,N)-Fe cermets with the carbon additions, Journal of Alloys and Compounds 701 (2017) 408-415.
46.Xin Peng, Kun Peng, Jianping Huang, Synthesis and magnetic properties of core-shell structured Finemet/ NieZn ferrite soft nanocomposites by co-precipitation, Journal of Alloys and Compounds 691 (2017) 165-170.
47.Y.X. Lai, B.C. Jiang, C.H. Liu, Z.K. Chen, C.L. Wu, J.H. Chen, Low-alloy-correlated reversal of the precipitation sequence in Al-MgSi alloys, Journal of Alloys and Compounds 701 (2017) 94-98.
48.Jianjun Liang, Hanning Xiao , Pengzhao Gao, Wenming Guo, Jingxiong Liu, Microstructure and properties of 2D-Cf/SiC composite fabricated by combination of CVI and PIP process with SiC particle as inert fillers, Ceramics International 43 (2017) 1788–1794.
49.Aoshuang Tan, Jie Teng, Xiang Zeng, Dingfa Fu & Hui Zhang, Fabrication of aluminium matrix hybrid composites reinforced with SiC microparticles and TiB2 nanoparticles by powder metallurgy, Powder Metallurgy, Volume 60, 2017 -Issue 1, 66-77.
50.Li-cai Fu, Wen Qin, Jun Yang, Wei-min Liu, Ling-ping Zhou, Corrosion−wear behavior of nanocrystalline Fe88Si12alloy in acid and alkaline solutions, Int J Miner Metall Mater (2017) 24: 75.
51.Li Gu, Wuhua Yuan, Rong Liao, Hongsheng Wang & Baoxin Zhu, Effect of TiO2 addition on the microstructures, mechanical and dielectric properties of porous Si3N4-based ceramics, ADVANCES IN APPLIED CERAMICS, 2017 VOL. 116, NO. 6, 348–354.
52.Li-cai Fu, Wen Qin, Jun Yang, Wei-min Liu, and Ling-ping Zhou,Corrosion−wear behavior of nanocrystalline Fe88Si12 alloy in acid and alkaline solutions, Int J Miner Metall Mater (2017) 24: 75.
53.Lei Yang, Zhongcheng Jiang, Blue-Shift of Ultraviolet Luminescence in Rough Surfaced ZnO Nanotubes Embedded in the AAO Template, Journal of Nano Research, Vol. 45, pp. 175-184, 2017.
54.Wu Jing, Chen Hui, Wu Qiong, Liu Hongbo, Luo Zhanj, Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder, Materials and Design 116 (2017) 253–260.
55.Wei Li, Hongyu Li, Xinguo Yang, Wei Feng, Hongyun Huang, Preparation and properties of novel sulfonic graphene oxide–epoxy resin nanocomposites by resin transfer molding process, Journal of Composite Materials 51(9) 1197–1208.
56.Jihua Chen, Guanqing Chen, Hongge Yan, Bin Su, Xiaole Gong & Bo Zhou, Correlation Between Microstructure and Corrosion Resistance of Magnesium Alloys Prepared by High Strain Rate Rolling, J. of Materi Eng and Perform (2017) 26:4748-4759.
57.Jin Li, Lei Zheng, Hongbo Liu, A novel carbon aerogel prepared for adsorption of copper(II) ion in water, J Porous Mater (2017) 24: 1575.
58.Chao PENG, Yuan LI, Yonghe DENG, Ping PENG, Atomistic Simulation for Local Atomic Structures of Amorphous Ni-P Alloys with Near-Eutectic Compositions, Acta Metall 2017, Vol. 53 Issue (12): 1659-1668.
59.Jinrong Wang, Jianfeng Wang, Zhuo Chen, Shaoli Fang, Ying Zhu, Ray H. Baughman, and Lei Jiang, Tunable, Fast, Robust Hydrogel Actuators Based on Evaporation-Programmed Heterogeneous Structures, Chem. Mater. 2017, 29, 9793-9801
60.Feng Hao, Zhixiao Liu, Perla B. Balbuena, and Partha P. Mukherjee, Mesoscale Elucidation of Solid Electrolyte Interphase Layer Formation in Li-Ion Battery Anode, the Journal of Physical Chemistry C 2017 121 (47), 26233-26240
61.Bing Nan, Xiu-Cui Hu, Xu Wang, Chun-Jiang Jia, Chao Ma, Ming-Xing Li, and Rui Si, Effects of Multiple Platinum Species on Catalytic Reactivity Distinguished by Electron Microscopy and X-ray Absorption Spectroscopy Techniques,J. Phys. Chem. C 2017, 121, 46, 25805-25817
62.Haibo Luo, Jie Teng, Shuang Chen, Yu Wang, and Hui Zhang, Flow Stress and Processing Map of a PM 8009Al/SiC Particle Reinforced Composite During Hot Compression, Journal of Materials Engineering and Performance, (2017) 26:4789–4796.
63.LIU Xiaopan, KONG Weibing, XIAO Haiyan, TANG Hao, WAN Long, HU Weida, Influence of Heat Treatment Temperature on Microstructure and Bonding of TiO2 Film Coated on Diamond Particles Surface, Journal of Wuhan University of Technology. Materials Science Edition, 2017(5):1008-1012
64.Ling-Hong Liu, Tou-Wen Fan, Cui-Lan Wu, Pan Xie, Ding-Wang Yuan, Jiang-Hua Chen, Synergistic Effect of Alloying Atoms on Intrinsic Stacking-Fault Energy in Austenitic Steels, Acta Metall. Sin. (Engl. Lett.) (2017) 30: 272.
65.Mengyun Tang , Zhengfu Zhang, Zi Wang, Jingfeng Liu, Hongge Yan, Jinhui Peng, Lei Xu, Shenghui Guoc , Shaohua Juc , Guo Chenc, Synthesis of FeF2/carbon composite nanoparticle by one-pot solid state reaction as cathode material for 53. lithium-ion battery, j. mater. res. technol. 2018;7(1):73-76.
66.Jia-jun Zhu, Yu-hao Hu, Meng Xu, Wu-lin Yang, Li-cai Fu, De-yi Li, Ling-ping Zhou, Study on Silver-plated Molybdenum Interconnected Materials for LEO Solar Cell Array, Mater. Sci. Eng. 229 012010.
67.Hongyan Sun, Xinming Li, Yuanchang Li, Guoxin Chen, Zhiduo Liu, Fakhr E. Alam, Dan Dai, Li Li, Li Tao, Jian-Bin Xu, Ying Fang, Xuesong Li, Pei Zhao, Nan Jiang, Ding Chen, and Cheng-Te Lin, High-Quality Monolithic Graphene Films via Laterally Stitched Growtand Structural Repair of Isolated Flakes for Transparent Electronics, Chem. Mater. 2017, 29, 7808−7815.
68.Nan Lin, Yuehui He, Xiyue Kang, Enhanced Interface Structure and Properties of Titanium Carbonitride-Based Cermets with the Extra Solid Phase Reaction, Materials 2017, 10, 1090.
69.Feng Xu, Hongge Yan, Jihua Chen, Mao He, Zhengfu Zhang, Changling Fan, Gengshuo Liu, Improving electrochemical properties of LiCoO2 by enhancing thermal decomposition of Cobalt and Lithium carbonates to synthesize ultrafine powders, Ceramics International 43 (2017) 6494–6501.
70.Rong Peng, Wulin Yang, Licai Fu, Jiajun Zhu, Deyi Li, Lingping Zhou, Superhydrophilicity of novel anodic alumina nanofibers films and their formation mechanism, Mater. Res. Express 4 (2017) 065007.
71.Chuanyu Jin, Lingping Zhou, Licai Fu, Jiajun Zhu, Deyi Li, Wulin Yang, The acceleration intermediate phase (NiS and Ni3S2) evolution by nanocrystallization in Li/NiS2 thermal batteries with high specific capacity, Journal of Power, Journal of Power Sources 352 (2017) 83-89.
72.Jihua Chen, Guanqing Chen, Hongge Yan, Bin Su, Xiaole Gong, and Bo Zhou, Correlation Between Microstructure and Corrosion Resistance of Magnesium Alloys Prepared by High Strain Rate Rolling, Journal of Materials Engineering and Performance (2017) 26:4748–4759.
73.Jiang Wu, Jihua Chen, Hongge Yan, Weijun Xia, Bin Su, Lang Yu, Gengshuo, Liu & Min Song, Enhancing the mechanical properties of high strain rate rolled Mg–6Zn–1Mn alloy by pre-rolling, J Mater Sci (2017) 52:10557-10566.
74.Chuanyu Jin, Lingping Zhou, Licai Fu, Jiajun Zhu, Deyi Li, Synthesis anddischarge performances of NiCl2 by surface modification of carbon coating as cathode material of thermal battery, Applied Surface Science 402 (2017) 308–313.
75.Hui Guo, Zheng Liu, Hengyue Li, Han Wu, Chujun Zhang, Junliang Yang, Xiaohua Chen, Active carbon electrode fabricated via large-scale coating-transfer process for high-performance supercapacitor, Appl. Phys. A (2017) 123: 467.
76.Chao Xu, Xianglai Gan, Xiancai Meng, Shifang Xiao, Huiqiu Deng, Xiaofan Li, Wangyu Hu, Atomistic simulations of solidification process in B2-LiPb solid(0 0 1)-liquid system, Journal of Crystal Growth 470 (2017) 113–121.
77.S.Y. Duan, C.L. Wu, Z. Gao, L.M. Cha, T.W. Fan, J.H. Chen, Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys, Acta Materialia 129 (2017) 352-360.
78.Fei Han, Chengzhi Zhang, Bing Sun, Wen Tang, Jianxiao Yang, Xuanke Li, Dual-carbon phase-protective cobalt sulfide nanoparticles with cable-type and mesoporous nanostructure for enhanced cycling stability in sodium and lithium ion batteries, Carbon 118 (2017) 731-742.
79.Zheng Liu, Kuikui Xiao, Hui Guo, Xiaohua Ning, Aiping Hu, Qunli Tang, Binbin Fan, Yanfei Zhu, Xiaohua Chen, Nitrogen-doped worm-like graphitized hierarchical porous carbon designed for enhancing area-normalized capacitance of electrical double layer supercapacitors, Carbon 117 (2017) 163-173.
80.Moumita Dutta, Ying Ding, Jianghua Chen, Chonglin Chen, Amar Bhalla, Ruyan Guo, Defect-dipole defined nanoscale ferroelectric polar-orders induced in Barium Zirconate, Scripta Materialia 130 (2017) 119–123.
81.Yongfang Wang,Songlin Zuo,Jianxiao Yang, andSeong-Ho Yoon, Evolution of Phosphorus-Containing Groups on Activated Carbons during Heat Treatment,Langmuir2017,33,12,3112-3122.
82.Xin-Tong Shu, Shi-fang Xiao and Hui-qiu Deng, Lei Ma, Wangyu Hu, Atomistic simulation of crack propagation in single crystal tungsten under cyclic loading, J. Mater. Res.,32(2017) 1474-1483.
83.Hongyan Sun, Ding Chen, Yuming Wu, Qilong Yuan, Liangchao Guo, Dan Dai, Yang Xu, Pei Zhao, Nan Jiang, Cheng-Te Lin, High quality graphene films with a clean surface prepared by an UV/ozone assisted transfer process, J. Mater. Chem. C, 2017, 5, 1880--1884.
84.Xueping Wu, Honglai Li, Hongjun Liu, Xiujuan Zhuang, Xiao Wang, Xiaopeng Fan, Xidong Duan, Xiaoli Zhu, Qinglin Zhang, Alfred J. Meixner,b, Xiangfeng Duanc and Anlian Pan, Spatially composition-modulated twodimensional WS2xSe2(1−x) nanosheets, Nanoscale, 2017, 9, 4707–4712.
85.Zhengjian Chen, Yun Zhou, Xiaoyun Ma, Hujun Shen, Shiguo Zhang, N, S-Codoped Mesoporous Carbon Derived from Protic Salt for Oxygen Reduction Reaction, J. Electrochem. Soc. 2017volume 164, issue 2, H32-H36.
86.Sheng-qing Hu, Kun Peng, Hong Chen, Influence of annealing temperature on the Dy diffusion process in NdFeB magnets, Journal of Magnetism and Magnetic Materials 426 (2017) 340–346.
87.Ling-Hong Liu, Tou-Wen Fan, Cui-Lan Wu, Pan Xie, Ding-Wang Yuan, Jiang-Hua Chen, Synergistic Effect of Alloying Atoms on Intrinsic Stacking-Fault Energy in Austenitic Steels, Acta Metall. Sin. (Engl. Lett.) (2017) 30: 272.
88.Jiangbo Lu, Chao Ma, Oxygen octahedral coupling and structural reconstruction at the intergrowth interface in bilayered Ca3Mn2O7, Acta Materialia 129 (2017) 26-32.
二、非材料学科ESI期刊：
89.Fu-hua Wei, Ding Chen, * Zhao Liang, Shuai-qi Zhao and Yun Luo, Preparation of Fe-MOFs by microwave-assisted ball milling for reducing Cr(VI) in wastewater, Dalton Trans., 2017, 46, 16525–16531
90.Zi He and Kunkun Guo ,Exploration of cell division times during bacterial cytokinesis, Phys. Chem. Chem. Phys., 2017, 19, 32038--32046
91.Shuaiqi Zhao, Ding Chen , Fuhua Wei, Nini Chen, Zhao Liang, Yun Luo, Removal of Congo red dye from aqueous solution with nickel-based metalorganic framework/graphene oxide composites prepared by ultrasonic wave-assisted ball milling, Ultrasonics Sonochemistry，Vol. 39，2017（11）, 845-852
92.Jie Wang, Qinqin Ma, Haoyang Liu, Yingqian Wang, Haijing Shen, Xiaoxia Hu, Chao Ma, Quan Yuan, and Weihong Tan, Time-Gated Imaging of Latent Fingerprints and Specific Visualization of Protein Secretions via Molecular Recognition, Analytical Chemistry, 2017,89(23), 12764–12770
93.Wenbin Tu, Yulin Cheng, Tingyan Zhan, Junxiang Han, Yingliang Cheng *, Influence of Sodium Tungstate and Sealing Treatment on Corrosion Resistance of Coatings Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation, Int. J. Electrochem. Sci. 12 (2017) 10863–10881
94.Deping Wang, Yanwen Zheng, Min Yang, Fuxing Zhang, Fangfang Mao, Jiangxi Yua, Xiaohong Xia, Room-temperature Cu-catalyzed N-arylation of aliphatic amines in neat water†, Org. Biomol. Chem. 2017, 15, 8009
95.Xu Wang, Xin-Pu Fu, Wen-Zhu Yu, Chao Ma,* Chun-Jiang Jia * and Rui Si, Synthesis of a ceria-supported iron–ruthenium oxide catalyst and its structural transformation from subnanometer clusters to single atoms during the Fischer–Tropsch synthesis reaction, Inorg. Chem. Front. 2017, 4, 2059–2067
96.Wenquan Ming , Jianghua Chen,∗, Christopher S. Allen , Shiyun Duan , Ruohan Shen, A quantitative method for measuring small residual beam tilts in high-resolution transmission electron microscopy, Ultramicroscopy 184 (2018) 18–28.
97.Yawen Liu, Nikolay Cherkasov, Pengzhao Gao, Javier Fernández, Martin R. Lees, Evgeny V. Rebrov, The enhancement of direct amide synthesis reaction rate over TiO2@SiO2@NiFe2O4 magnetic catalysts in the continuous flow under radiofrequency heating, Journal of Catalysis 355 (2017) 120–130
98.Fu-hua Wei, Ding Chen, * Zhao Liang, Shuai-qi Zhao and Yun Luo, Synthesis and characterization of metal–organic frameworks fabricated by microwave-assisted ball milling for adsorptive removal of Congo red from aqueous solutions, RSC Adv. 2017, 7, 46520-46528
99.Huali Wu, Qunli Tang, Haining Fan, Zheng Liu, Aiping Hu, Shiying Zhang, Weina Deng, Xiaohua Chen, Dual-Confined and Hierarchical-Porous Graphene/C/SiO2 Hollow Microspheres through Spray Drying Approach for Lithium-Sulfur Batteries, Electrochimica Acta 255 (2017) 179–186
100.Tenghui Song, Chuanjun Tu, Pengyang Feng, Mingzai Wu*, Gang Chen and Weidong Wang, A novel preparation of resin-based electrical contact material impregnated with sulfonated graphene, RSC Adv. 2017, 7, 43390–43395 .
101.Zhifei Zhu, Wuhua Yuan, Peng Zhang, and Rui Zhang, The Influence of High‐Temperature Deformation and Heat Treatment on Microstructure of AF1410 Ultra‐High Strength Steel, steel research int. 87 (2017) No. 9999.
102.Yan Kuang, Yuxi Chen, Xiaohong Xia, Yuede He, Li Yang, Hongbo Liu, Fabrication and electrochemical investigation of Li0.5TiO2 as anode materials for lithium ion batteries, Ionics (2017) 23: 3265.
103.Zhu Li, Kunkun Guo, Xuli Chen, Controllable synthesis of nitrogen-doped mesoporous carbons for supercapacitor applications, RSC Adv., 2017, 7, 30521–30532.
104.Zhiming Xiang,Yuxi Chen, Jin Li, Xiaohong Xia, Yuede He, Hongbo Liu, Submicro-sized porous SiO2/C and SiO2/C/graphene spheres for lithium ion batteries, J Solid State Electr(2017) 21:2425–2432.
105.Zuyong Wang, Feng Wen, Poon Nian Lim, Qinyuan Zhang, Toshiisa Konishi, Dong Wang, Swee Hin Teoh, Eng San Thian, Nanomaterial scaffolds to regenerate musculoskeletal tissue: signals from within for neovessel formation, Drug Discovery Today Volume 22, Number 9 September 2017.
106.Qun Wang, Chidambaram Seshadri Ramachandran, Gregory M. Smith, Sanjay Sampath b,*Sliding wear behavior of air plasma sprayed Al2O3 coatings sealed with aluminum phosphate, Tribology International 116 (2017) 431–439.
107.Tenghui Song, Chuanjun Tu, Pengyang Feng, Mingzai Wu, Gang Chen, Weidong Wang, A novel preparation of resin-based electrical contact material impregnated with sulfonated graphene, RSC Adv., 2017, 7, 43390–43395.
108.Qing-yuan SHE, Hong-ge YAN, Ji-hua CHEN, Bin SU, Zhao-hui YU, Chao CHEN, Wei-jun XIA, Microstructure characteristics and liquation behavior of fiber laser welded joints of Mg−5Zn−1Mn−0.6Sn alloy sheets, Trans. Nonferrous Met. Soc. China 27(2017) 812−819.
109.Huan-jun XIE, Ying-liang CHENG, Shao-xian LI, Jin-hui CAO, Li CAO Wear and corrosion resistant coatings on surface of cast A356 aluminum alloy by plasma electrolytic oxidation in moderately concentrated aluminate electrolytes, Trans. Nonferrous Met. Soc. China 27(2017) 336−351.
110.Luo-yi WU, Hao-tian LI, Zhong YANG, Microstructure evolution during heat treatment of Mg−Gd−Y−Zn−Zr alloy and its low-cycle fatigue behavior at 573 K, Trans. Nonferrous Met. Soc. China 27(2017) 1026−1035.
111.Liu Fang , Shen Jie, Zhou Wuyi, Zhang Shiying, Wan Long, In situ growth of TiO 2 /SiO 2 nanospheres on glass substrates via solution impregnationfor antifogging, RSC Advances, 2017, Vol.7(26), pp.15992-15996 .
112.Zan Zhou, Ding Chen, The decolorization and mineralization of orange II by microwave-assisted ball milling, Water Science and Technology, 75(12), 2784–2790.
113.M. S. Moreno, J. J. Kas, C. Ma, F. Wang, J. J. Rehr, M. Malac, Probing electronic structure of stoichiometric and defective SnO2, PHYSICAL REVIEW B 95, 245206 (2017).
114.Yongnan Xiong, Shifang Xiao, Huiqiu Deng, Wenjun Zhu and Wangyu Hu, Investigation of the shock-induced chemical reaction (SICR) in Ni + Al nanoparticle mixtures, Phys. Chem. Chem. Phys. 2017, 19, 17607--17617.
115.Huan Qi, Kui Liang , Wenxun Guo, Lingyun Tian, Xiaofeng Wen, Kaiyue Shi, Jusheng Zheng, Facile Fabrication and Low-cost Coating of LiNi0.8Co0.15Al0.05O2 with Enhanced Electrochemical Performance as Cathode Materials for Lithium-ion Batteries, Int.J. Electrochem. Sci., 12 (2017) 5836–5844.
116.Chunhui Liu, Sairam K. Malladi, Qiang Xu, Jianghua Chen, Frans D. Tichelaar, Xiaodong Zhuge4 & Henny W. Zandbergen1, In-situ STEM imaging of growth and phase change of individual CuAlX precipitates in Al alloy, Scientific Reports,volume 7, Article number: 2184 (2017).
117.Huibin Zhang, Xinli Liu, Yao Jiang, Lin Gao, Linping Yu, Nan Lin, Yuehui He, C.T. Liu, Direct separation of arsenic and antimony oxides by high-temperature filtration with porous FeAl intermetallic, Journal of Hazardous Materials 338 (2017) 364–371
118.Kun Wang, Jun Chen, Wenjun Zhu, Wangyu Hu, Meizhen Xiang, Phase transition of iron-based single crystals under ramp compressions with extreme strain rates, International Journal of Plasticity 96 (2017) 56-80.
119.Shiguo Zhang, Jiaheng Zhang, Yan Zhang, Youquan Deng, Nanoconfined Ionic Liquids, Chem. Rev. 2017, 117, 6755−6833.
120.Jaime Garcı´a-Aguilar, Javier Ferna´ndez-Garcı, Evgeny V. Rebrov,bc Martin Richard Lees,b Pengzhao Gao,d Diego Cazorla-Amoro´s a and A´ngel Berenguer-Murcia *a, Magnetic zeolites: novel nanoreactors through radiofrequency heating†, Chem. Commun. 2017, 53, 4262--4265.
121.Jiao Deng, Haobo Li, Suheng Wang, Ding Ding, Mingshu Chen, Chuan Liu, Zhongqun Tian, K.S. Novoselov, Chao Ma, Dehui Deng, Xinhe Bao, Multiscale structural and electronic control of molybdenum disulfide foam for highly efficient hydrogen production, Nature Communications volume8, Article number: 14430 (2017).
122.Xiaohua Fan, Youqing Fei, Lei Chen, Wei Li, Distribution and Structural Analysis of Polycyclic Aromatic Hydrocarbons Abundant in Coal Tar Pitch, Energ Fuel 2017, 31, 4694−4704.
123.Guosong Han, Ding Chen, Xiaoling Li, Synthesis and catalytic performance of antimony trioxide nanoparticles by ultrasonic-assisted solid-liquid reaction ball milling, Advanced Powder Technology 28 (2017) 1136–1140.
124.Cui-Huan Ge, Hong-Lai Li, Xiao-Li Zhu, An-Lian Pan, Band gap engineering of atomically thin two-dimensional semiconductors, Chinese Phys. B Vol. 26, No. 3 (2017) 034208.
125.Liming Yang, Yangbin Ding, Liang Chen, Shenglian Luo, Yanhong Tang, Chengbin Liu, Hierarchical reduced graphene oxide supported dealloyed platinumecopper nanoparticles for highly efficient methanol electrooxidation, International journal of hydrogen energy 42 (2017) 6705 -6712.
126.LICAI FU, JUN YANG, LINGPING ZHOU, WEIMIN LIU, WEAR BEHAVIOR OF NANOSTRUCTURED HYPOEUTECTIC Fe–B ALLOY, Surface Review and Letters, Vol. 24, No. 2 (2017) 1750023.
127.Zhengjian Che, Zuopeng Li , Xiaoyun M, Panfeng Long , Yun Zhou, Lin Xu *a and Shiguo Z, A facile and efficient route to hydrophilic ionic liquids through metathesis reaction performed in saturated aqueous solution,†Green Chem., 2017,19, 1303-1307 .
128.Xiang Zhang, Changling Fan, Ping’an Xiao, Shaochang Han, Effect of vinylene carbonate on electrochemical performance and surface chemistry of hard carbon electrodes in lithium ion cells operated at different temperatures, Electrochimica Acta 222 (2016) 221–231.
129.Fei Han, Tiezheng Lv, Bing Sun, Wen Tang, Chengzhi Zhang,Xuanke Li, In situ formation of ultrafine CoS2 nanoparticles uniformly encapsulated in N/S-doped carbon polyhedron for advanced sodium-ion batteries, RSC Adv. 2017, 7, 30699–30706.
130.Qun Wang, Chidambaram Seshadri Ramachandran, Gregory M. Smith, Sanjay Sampath b, Sliding wear behavior of air plasma sprayed Al2O3 coatings sealed with aluminum phosphate, Tribology International 116 (2017) 431–439.
131.Zhiming Xiang, Yuxi Chen, Jin Li, Xiaohong Xia, Yuede He, Hongbo Liu, Submicro-sized porous SiO2/C and SiO2/C/graphene spheres for lithium ion batteries, J Solid State Electrochem (2017) 21:2425–2432.
132.Lin Lang, Zean Tian, Shifang Xiao, Huiqiu Deng, Bingyun Ao, Piheng Chen, Wangyu Hu, Molecular dynamics simulations of the structure evolutions of Cu-Zr metallic glasses under irradiation, Nuclear Instruments and Methods in Physics Research B 393 (2017) 77–81.
133.Yan Kuang, Yuxi Chen, Xiaohong Xia, Yuede He, Li Yang, Hongbo Liu, Fabrication and electrochemical investigation of Li0.5TiO2 as anode materials for lithium ion batteries, Ionics (2017) 23:3265–3271.
134.Mengmeng Wei, Liming Yang, Longlu Wang, Tian Liu, Chengbin Liu, Yanhong Tang, Shenglian Luo, In-situ potentiostatic activation to optimize electrodeposited cobaltphosphide electrocatalyst for highly efficient hydrogen evolution in alkaline media, Chemical Physics Letters 681 (2017) 90–94.
135.Cui-Huan Ge, Hong-Lai Li, Xiao-Li Zhu‡, and An-Lian Pan†, Band gap engineering of atomically thin two-dimensional semiconductors, Chin. Phys. B Vol. 26, No. 3 (2017) 034208.
136.Xuegui Suna, Shifang Xiao b, Huiqiu Deng b,∗, Wangyu Hua,∗Molecular dynamics simulation of wetting behaviors of Li on W surfaces, Fusion Engineering and Design 117 (2017) 188–193.
137.Wenbin Tu, Yulin Cheng, Tingyan Zhan, Junxiang Han, Yingliang Cheng * ,Influence of Sodium Tungstate and Sealing Treatment on Corrosion Resistance of Coatings Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation, Int. J. Electrochem. Sci. 12 (2017) 10863–10881.
138.Su J, Zhang H, Teng J, Jiang F, Sun Y, Effect of heat treatments before cold rolling on microstructure and mechanical properties of 6016-T4P aluminum alloy sheet, Cailiao Daobao/Materials Review, 31(1), 87-91.
139.吴博强，刘海蓉，刘让苏，莫云飞，田泽安，梁永超，关绍康，黄昌雄，冷速对液态金属Mg凝固过程中微观结构演变的影响，《物理学报》2017年第1期245-253。
140.刘小磐，宋冬冬，万隆，庞先兵，李争，热处理温度对表面涂覆TiO2薄膜的金刚石成键及抗氧化性能的影响，稀有金属材料与工程，第46卷第1期,2017,195-200。
141.陈吉华，邹正阳，严红革，苏斌，邰辉辉，巩晓乐，黄姜凌, Ca对医用Mg-4Zn合金轧制板材组织与性能的影响,《湖南大学学报：自然科学版》2017年第12期27-33页
142.郑磊,李劲,刘洪波, AEP作用下溶胶凝胶法制备纤维素基炭气凝胶及其对水溶液中Cu2+吸附性能,无机材料学报, 2017年11期，P1159-1164
143.黄凯兵,申家源,夏平宇.喻含,刘帅,硅烷偶联剂预处理PANI对水性涂料性能的影响,精细化工，2017年第11期1219-1225
144.黄智博，郑航博，高朋召，程磊，袁铮，李冬云,核壳结构纳米铁氧体复合材料的制备及其光催化活性的研究进展,中国陶瓷工业,第24卷第5期2017年10月
145.侯冬冬,陈惠,丁乐,刘洪波,刘金平,杨程,中温沥青改性MCMB制备石墨材料结构与性能,炭素技术, 2017年第5期,第36卷
146.张宝丽，陈刚，孙永庆，袁武华，梁剑雄,氮含量对0Cr16Ni5Mo马氏体不锈钢高温热变形行为影响,工程科学学报，第39卷，第10期: 1525--1531.
147.彭晚军，丁纪恒，夏伟军，余海斌,石墨烯分散液对环氧树脂稀释效果及热性能的影响,《塑料科技》2017年第10期71-75页.
148.金鹤,周灵平,朱家俊,符立才,杨武霖,李德意,空间太阳电池玻璃盖板表面超薄ITO防静电层的设计及制备工艺*,《材料导报》2017, Vol. 31 Issue (17): 158-162
149.陈刚,陈珊,张艳斌,林羽,王馨瑶,热处理对42CrMo制动盘摩擦磨损性能的影响,《热加工工艺》2017年第16期246-250页.
150.冯鹏洋,涂川俊,陈查坤,韦摇巩,顾志平,磺化石墨烯对树脂基炭刷载流磨损性能的影响,新型炭材料,第32卷第4期2017年8月.
151.陈吉华,邹正阳,严红革,谢蕊鸿,施扬健,巩晓乐,黄姜凌,高应变速率轧制对Mg-4Zn合金组织及性能的影响,《稀有金属材料与工程》2017年第8期2220-2226页.
152.彭晚军,丁纪恒,夏伟军,余海斌,生物基呋喃甲基缩水甘油醚对环氧树脂固化物性能的影响, China Plastics Industry, 2017, Vol.45(08), pp.23-26.
153.费又庆,宁晓魏,欧阳婷,非接触式激光测微法测定炭纤维单丝拉伸应变及模量,湖南大学学报(自然科学版),第44卷第6期2017年6月p57-62.
154.蔡翔，张辉，陈爽,粉末挤压成型制备SiCp／AI复合材料的显微组织及性能,机械工程材料，2017年7月第41卷第7期。
155.阳海林，梁逵，杜建龙，田凌云，文晓峰，简单温和的置换途径制备锂离子电池纳米硅负极材料，电子元件与材料2017年第7期43-47页。
156.冉敏，严红革，程相飞，陈吉华，苏斌，夏伟军，张明，Ｆｅ－１７Ｍｎ－８Ｃｒ合金在多向锻造过程中显微组织与性能的变化，机械工程材料41卷7期18-23.
157.田松栗，谢盼，伍翠兰，韩梅，朱恺，退火温度对冷轧Fe20Mn0. 3C钢组织及其拉伸变形行为的影响，材料热处理学报，2017年第7期93-100。
158.陈振华，黄瑞明，陈鼎，张忠健，徐涛，应力比对ＷＣ－Ｃｏ硬质合金疲劳性能的影响，湖南大学学报（自然科学版）第44卷第6期2017年6月
159.高文理，钦凤，金滩，谢桂芝，服役KC3L9钢轨疲劳裂纹萌生及扩展分析，《湖南大学学报：自然科学版》2017年第6期25-29页。
160.陈 鼎，姚 亮，陈振华，王辉平，彭 文，ＷＣ－Ｃｏ类硬质合金的低周冲击疲劳性能研究，《稀有金属与硬质合金》2017年第3期71-75页。
161.陈鼎，熊维，陈林，陈振华，微波辅助球磨还原含Ｃｒ（Ⅵ）废水的研究＊，《湖南大学学报：自然科学版》2017年第6期52-56。
162.高朋召，吕华南，徐墨雨，袁铮，李冬云，肖汉宁，高温氧化时间对ＭｏＳｉ２－ＲＳｉＣ复合材料组成、微观结构和性能的影响，《湖南大学学报：自然科学版》2017年第6期45-51页。
163.陈刚，刘春铮，陈杰，汤汉良，喷射沉积颗粒梯度增强铝合金活塞的锻压工艺，《湖南大学学报：自然科学版》2017年第6期19-24页。
164.陈石林，郭建光，周娩红，谭嘉朕，催化聚合工艺对萘沥青结构和性能的影响，《湖南大学学报：自然科学版》2017年第6期81-86页。
165.肖平安，宋建勇，陈超，刘洋，李志华，顾景洪，烧结亚共晶高铬铸铁制备及其显微组织与性能，《湖南大学学报：自然科学版》2017年第6期37-44页。
166.李志华，肖平安，李晨坤，刘洋，宋建勇，陈超，粗晶TM52钢结硬质合金的冲击磨料磨损性能研究，《材料导报》2017年第12期39-44页。
167.黄磊萍，杨修波，陈江华，章国辉，赵新奇，不同热处理工艺对Al-3.8Zn-1.6Mg铝合金微结构与腐蚀行为作用的探讨，《电子显微学报》2017年第3期222-228页。
168.李玉平，徐小燕，章鹏，石忠强，李晓琳，烧成助剂的添加对电瓷机械性能的影响，《湖南大学学报：自然科学版》2017年第6期63-68页。
169.陈江华，赵甜甜，余雄伟，杨修波，高珍，伍翠兰，饶栋，预变形对7N01铝合金力学性能及显微结构的影响，《湖南大学学报：自然科学版》2017年第6期12-18页。
170.韦复华，梁钊，姚亮，罗云，赵帅奇，陈鼎，金属有机框架材料的制备及应用研究进展，《现代化工》2017年第5期33-37。
171.袁剑民，摇冯艳荣，摇吴振军，摇王彦军，李丝雨，孙摇萍，一种低膨胀高刚性的炭纤维网络增强聚丙烯复合材料，《新型炭材料》2017年第3期271-276。
172.佘庆元，严红革，陈吉华，苏斌，陈潮，陆梅，曹梦馨，余浪，锡对Ｍｇ－５Ｚｎ－１Ｍｎ合金显微组织及拉伸性能的影响，《机械工程材料》2017年第5期1-6。
173.张孟军，夏伟军，陈鼎，王新，肖迪，热挤压对铸态MgＧ３．５AlＧ３．５CaＧ０．６Mn合金组织与性能的影响，机械工程材料2017年5月第41卷第5期。
174.朱家俊，黎三华，申镭诺，杨武霖，李周，新型超高强Cu-Ni-Al-Si合金在3.5%NaCl溶液中的腐蚀行为《中国有色金属学报：英文版》2017年第5期1096-1104页。
175.张辉，张晓静，刘志文，郭鹏程，王震虎，方向东，横梁接头形式优化及其在白车身性能提升上的应用，《湖南大学学报：自然科学版》2017年第4期1-8页。
176.王宇,滕杰,陈爽,罗海波,唐柳莲,张辉. 15%SiCP/8009铝基复合材料热压缩流变应力行为[J].航空材料学报, 2017, 37(2): 7-12.
177.李伟，钱秀洋，费又庆，短切碳纤维增强尼龙66复合材料注塑成型工艺模拟，《复合材料学报》2017年第4期812-818页。
178.冯艳荣，袁剑民，王文力，李伟，性聚丙烯酸酯涂料染色黏合剂的合成及其性能，《纺织学报》2017年第4期90-96。
179.张福全，马永富，周惦武，刘金水，宋建力，Zr-Sn-Nb合金织构与力学性能，《稀有金属材料与工程》2017年第3期687-692
180.黄凯兵，杨秀文，王智健，姚异渊，基于四羟甲基甘脲前驱体的新型含氮富微孔活性炭制备及其性能研究，《材料导报》2017年第4期30-35。
181.黄凯兵，姚异渊，杨秀文，二醋酸纤维素酯接枝聚乳酸的制备及性能研究，《湖南大学学报：自然科学版》2016年第12期104-109。
182.王小娜，张辉，5005铝合金热压缩变形行为，《锻压技术》2017年第2期119-123。
183.黄凯兵，吴芬霞，杨帆，申家源，复合疏水扩链剂对聚氨酯乳液性能的影响，《精细化工》2017年第2期235-240。
